KENTEK DB9 9 Pin to HD15 VGA 15 Pin Video Adapter Changer Coupler for Multi-Sync Molded RS-232

Please check the provided pictures and the wiring diagram before making a purchase to ensure correct setup and compatibility.

• This adapter will only work with the specific setup as stated in the listing and its required have the adapter function properly and as intended.
• VERIFY SIGNAL TYPE: Please ensure that the transmitted signals from both ends of the connected devices are of the same type for the adapter to work properly.
• Please also refer to the provided wiring diagram in the pictures for guidance.
• This is not an bi-directional adapter.
• This DB9 female to HD15 male adapter is primarily a legacy solution designed to bridge older equipment with standard VGA displays, and it will only work with modern machines if those machines still have the specific required legacy ports or compatible video cards.
• It is not a general-purpose adapter for modern computers lacking these specific legacy interfaces.
• This adapter is NOT a Signal Converter: it is a physical pin rearranger designed for very specific scenarios such as connecting Legacy Video Output to Modern Displays: The most common use is connecting a legacy system (like an old industrial PC, a CGA/EGA system, or an older NEC MultiSync monitor) that has a DB9 video output port to a monitor or display that has a standard HD15 VGA input port.
• Compatibility of this adapter Requires Specific Hardware: Equipments using this adapter needs to have a video card or motherboard with a special DB9 port that is designed to output a VGA-compatible RGB video signal, often referred to as a multisync video output port.
• Standards: UL, CSA, ISO 9001:2000 manufacturer.
• **Please check picture for wiring diagram before purchase.
• *DOES NOT work on/ convert Serial DB9 RS-232 Data port to VGA video signal.